The IP55 Potted 12V LED Power Supply is designed for LED bathroom mirrors, mirror cabinets, wardrobe lighting, and decorative LED strip applications.
Featuring internal potting technology, the power supply provides enhanced protection against moisture, dust, and environmental exposure. Its slim, compact housing makes it suitable for concealed installations behind mirrors and inside furniture.
Available in 12W, 24W, 36W, 48W, and 60W versions, this low-voltage LED power supply delivers 12V DC output for compatible LED lighting systems, including single-color and CCT applications when paired with suitable controllers.
| Quantity: | |
|---|---|
The XINSHENGLU IP55 Potted 12V LED Power Supply is a compact power solution designed for LED bathroom mirrors, illuminated mirror cabinets, wardrobe lighting, display cabinets, and other low-voltage LED applications.
Unlike conventional non-potted LED power supplies, this model features an internal potting process that encapsulates electronic components with protective material, improving resistance to moisture, dust, and environmental exposure.
With a slim housing and multiple wattage options, it offers a practical solution for LED lighting manufacturers, mirror factories, furniture manufacturers, and OEM/ODM projects.
The internal electronic components are protected using a potting process, in which a protective compound is applied inside the power supply housing.
This construction helps:
Reduce moisture exposure to internal electronic components.
Improve protection against dust and environmental contaminants.
Provide additional mechanical support to encapsulated components.
Support more reliable operation in appropriately designed installations.
The power supply is marked with an IP55 protection rating, offering protection against limited dust ingress and water jets under the specified IP55 test conditions.
Note: IP55 does not indicate suitability for immersion in water. Actual installation conditions, cable connections, and applicable electrical safety requirements must be considered.
Designed to convert AC mains electricity into 12V DC output, the power supply is suitable for compatible low-voltage LED lighting systems.
Typical applications include:
12V single-color LED strips
12V CCT tunable-white LED strips
LED illuminated bathroom mirrors
Mirror cabinet lighting
Furniture and decorative LED lighting
For dimming or CCT color-temperature adjustment, a compatible external LED controller or switch is required.
The compact and low-profile housing allows the power supply to be installed discreetly in areas where installation space is limited.
Its streamlined design is particularly useful for LED mirror manufacturers and furniture lighting projects that require electrical components to remain hidden.
The series is available in five output configurations to accommodate different LED lighting requirements.
Output Voltage | Output Current | Rated Power |
|---|---|---|
DC 12V | 1A | 12W |
DC 12V | 2A | 24W |
DC 12V | 3A | 36W |
DC 12V | 4A | 48W |
DC 12V | 5A | 60W |
Select the appropriate model based on the connected LED load, electrical requirements, and recommended operating margin.
The HANSEN 12V LED power supply can be incorporated into a variety of lighting products and furniture assemblies.
Behind LED Bathroom Mirrors
Provides low-voltage power for compatible mirror backlighting systems while allowing concealed installation behind the mirror.
Inside Mirror Cabinets
Suitable for powering integrated LED lighting in illuminated bathroom cabinets.
Under Vanity Tables
Supports LED strip lighting installed beneath vanity furniture and countertops.
Inside Wardrobes
Provides 12V DC power for integrated wardrobe and closet lighting systems.
Inside Display Cabinets
Suitable for decorative shelf lighting, display lighting, and commercial furniture applications.
Inside Vanity Cabinets
Supports concealed LED installations in properly designed bathroom vanity cabinetry.
Installation must follow applicable electrical regulations, moisture protection requirements, and thermal management recommendations.
Internal potting provides an additional protective barrier around electronic components compared with conventional non-potted designs.
For LED mirror and furniture lighting manufacturers, this construction can be especially useful where condensation, humidity, or incidental moisture exposure must be considered.
Combined with its compact form factor and multiple 12V output configurations, the HANSEN potted LED power supply is an option for manufacturers seeking a practical low-voltage lighting power solution.
HANSEN provides OEM and ODM support for LED mirror switches, lighting control modules, LED power supplies, and related accessories.
For customized projects, please contact our team to discuss electrical specifications, cable lengths, connectors, packaging, labeling, and other project requirements.
A potted LED power supply uses a protective compound around internal electronic components to help reduce exposure to moisture, dust, and certain environmental conditions.
No. IP55 provides a specified level of dust and water-jet protection but does not make the product suitable for underwater installation or continuous immersion.
It can be used in an appropriately designed LED mirror installation, subject to electrical safety, mounting, heat dissipation, and local bathroom installation requirements.
Yes, provided the LED strip is compatible with the 12V output and the system uses a suitable CCT controller. The power supply itself is not described as providing built-in CCT switching.
Calculate the total power consumption of the connected LED lighting and choose a compatible power supply with sufficient capacity.
For example, a 28W LED load may be paired with a 36W power supply, provided all other electrical specifications are compatible.
The product series includes 12W, 24W, 36W, 48W, and 60W configurations, all designed for 12V DC output.
Looking for a reliable IP55 potted 12V LED power supply for your LED mirror or furniture lighting project?
Contact HANSEN to discuss available models, technical specifications, samples, bulk orders, and OEM/ODM requirements.
